Industrial water purification system Technical 100

Specifications

In water treatment systems with industrial productivity at the level of 100 to 1000 dm3/h. The stations allow receiving purified water of the third degree of purity according to ISO 3696: 1999. Each device is designed and manufactured to meet the individual needs of the customer. These devices can be used as a central unit producing purified water. By distributing the appropriate network, the system can supply water to several laboratory rooms or floors in the building, as well as laboratory point devices.

TECHNICAL SPECIFICATIONS:
- The device is fed with tap water.
- Degrees of water purification:
• filtration in sedimentation filters: cascade filtration in 20 µm and 5 µm high efficiency sediment filters,
• filtration in carbon filters: filtration on granular activated carbon to remove organic compounds, chlorine and chlorine derivatives,
• softening process (option): automatic softening station: rinsing and regeneration of the reservoir is done automatically, compact construction - corrosion resistant ion exchange column (glass fibre tank) placed inside the salt housing, high capacity to remove hardness ions,
• reverse osmosis station: efficiency: 100-150 dm3/h (depending on model), retention ratio 96-99%, recovery rate 60%, high pressure pump, retention and permeate rotameters,
• UV lamp (option).
- Automatic operation requiring no maintenance of the device.
- Retention rate is 96-99%.
- Water inlet point: third * purity class according to ISO 3696: 1999.
- Choice of various capacities of purified water storage tank (not included).
- Automatic system shut-off with a full tank or closed water inlet points.
- Can be connected to a dishwasher, autoclave, analyser, etc.
- Possibility of creating a water distribution network with inlet points covering several rooms or floors in a building.
- Water inlet control points.
- Automatic membrane rinsing (individual membrane rinsing period and time can be set).
- Forced membrane flushing (service).
- System designed for cold water supply: 5-40°C.
- The possibility of self-service by the user (without having to call for service).
- Power supply: 230V / 50Hz.
- Stainless steel structure.

SYSTEM MONITORING FUNCTIONS:
- The device is equipped with a microprocessor control and measuring system which has:
• colour graphic display with touch panel function,
• conductivity meter that measures the conductivity and temperature of tap water,
• conductivity meter measuring conductivity and temperature of purified water after reverse osmosis, conductivity measurement in µS/cm or MOhm units, automatic temperature compensation,
• continuous monitoring and preview of the degree of retention of the RO membranes,
• clock with date and time,
• alarm informing about mechanical and carbon filter replacement,
• alarm informing about replacement of the RO module,
• alarm informing about the replacement of the UV lamp radiator (option),
• tank filling level information on the display of the device,
• preview of service dates,
- Menu in English and Spanish,
- Built-in RS 232 connector for communication with a computer ensuring the possibility of individual adjustment of service frequencies and alarm levels,
- Built-in USB connector for communication with a computer, which ensures the possibility of individual adjustment of operating frequencies and alarm levels,
- Software allowing individual settings of alarm thresholds and data archiving.

FUNCTIONS ENSURING THE OPERATION OF THE SYSTEM:
- Interruption of system operation on:
• low feed water pressure (lack of feed water),
• a full tank / closed water inlet point.
- Thermal protection of the osmotic module, automatic interruption of the system operation at the supply water temperature below 4°C or above 40°C.
- Ability to interrupt the system when an alarm occurs.
- Automatic system start-up capability.
- Message monitoring / alarm preview.

PURIFIED WATER PARAMETERS:
The purified water in the device meets the requirements of ISO 3696:1999 for grade 3 water*.
* depends on the quality of the feed water, the retention rate is 96-99%.

PURIFIED WATER PARAMETERS:
The purified water in the device meets the requirements of ISO 3696:1999 for grade 3 water*.
* Depending on the quality of the feed water, the retention rate is 96-99%.

ADDITIONAL EQUIPMENT / SERVICES:
- A tank for storing purified water:
• pressure - option: 80L, 110L, 230L, 320L or 450L,
• unpressurised - capacity to be agreed (customised),
- Compact device housing made of acid-proof stainless steel (all system components, except the tank, installed inside the housing),
- Automatic softening station,
- Acid resistant stainless steel tank housing,
- Complete DQ, IQ, OQ, PQ qualification procedure with documentation,
- Cooperation with building management systems (BMS).

REQUIRED CONNECTIONS AT THE INSTALLATION LOCATION:
- Cold water connection from ¾" or 1" tap,
- Drainage system to sewer (sewer grate),
- 230V socket.

OPERATING MATERIALS:
- 20µm sediment filter (replaced every 6 months *).
- Sediment filter 5 µm (replaced every 6 months *)
- GAC carbon filter (replacement every 6 months *)
- UV lamp 254 nm (replacement 8500h) (not included)
* the viability of the insert may vary depending on the flow, its characteristics and the level and type of contamination of the tap water.

Translated with www.DeepL.com/Translator (free version)